Thursday, April 23, 2009
NOTE: You may notice that this same tutorial exists on the Ubuntu Forums. That's because I wrote it! This is a re-posting of that tutorial. So not to worry, no one is being ripped off. Scout's honor.
I have found that there is a dearth of information on ways to get music onto cell phones under Linux, so I'm hoping this tutorial will help many of you out there. I have tested this method and verified that it works with my LG Dare from Verizon Wireless as well as my girlfriend's LG Chocolate II (also from VZW). This method will probably work with Verizon's other BREW handsets (just about everything they sell that isn't a smartphone) because the music player software is very similar across the board but again, I've only tested using the two phones mentioned above. VZW phones are the focus of this tutorial.
As to be expected, VZW provide no support for anything other than Windows and leave users of other OSes in the cold (and even their Windows solution is god-awful). My phone never even recognized MP3 files that I manually copied over to the proper folder on the memory card either. Even if that did work, who wants to manually copy over songs one by one? I created a playlist and wanted to send the playlist to the phone without a lot of copying and pasting.
This method may work with other phones as well-- so if you have luck with your phone, please post your results and comments in this thread.
For the purpose of this tutorial, we will assume that you already have Amarok and have scanned your collection into the library. We will be using Amarok 1.4.10, the last 1.x release, since as of this writing Amarok 2 does not offer mobile device support. I have verified everything listed here under Ubuntu Intrepid, but other variants should work as well.
What you will need:
-External Memory Card (sorry, no way to do this with the phone's internal memory AFAIK)
-AmaroK 1.4.10 (currently available in the repositories)
What you will NOT need:
-VZW's Rhapsody crapware
-DRM-protected music. Sorry, but DRM-protected files are outside the scope of this tutorial.
Ok, down to business!
Part A: Make sure your memory card is set up properly
The phone expects a specific set of folders on the memory card in order to handle media properly (my_music, my_pix, my_flix, etc). If you have just bought a memory card, you may need to format it in order to ensure that these folders exist. The easiest way to do this is to insert the card into your phone and then just turn the phone off and back on again. The phone will probably create the folders for you at this point.
2. Mount the card
Insert your memory card into your card reader and mount it, then check the mount point if you don't know it already by navigating to it in Nautilus and checking the address shown (usually something similar to /media/disk/ ). Open the card and make sure the folders mentioned above exist. If not, create them manually.
Part B: Configure your memory card as a media device in Amarok
1. Choose Settings - Configure Amarok - Media Devices
2. Choose Add Device...
You will be presented with 3 options:
-"Select the plugin to use with this device:" -> Choose Generic Audio Player
-"Enter a name for this device (required):" -> Name the device whatever you like
-"Enter the mount point of the device, if applicable": -> Enter the mount point from Part A, step 2
3. Click the Devices tab, then click the gears icon (to the right of the Transfer button) to configure additional settings for the device:
-Ignore pre&post-disconnect commands, transcoding options
-Leave all checkboxes at defaults (all unchecked)
-Song location: This part is important. You must tell Amarok to place the files in the my_music folder in the phone. Configure the filenames however you please but make sure that the files will NOT be nested in any folders underneath my_music. For example if you leave it at the defaults, Amarok will create a hierarchy of my_music/artistname/albumname/filename.mp3. If you sync using this hierarchy, the phone won't see your music when you are finished.
The path asked for here is relative to the root directory of the memory card (e.g. /media/disk/ in this example) so you don't need to specify the path to the card. The format I use is simply: my_music/%artist-%title.%filetype.
Part C: Sync your tunes
1. Under the Collection or Playlists tab, choose the songs or playlists you want to sync, right-click and choose transfer to device or sync to device.
2. In the Devices tab, Choose audio player you set up in part B from dropdown at the top of the Devices section, then choose Connect.
3. Click the Transfer button and watch your music sync!
4. Once the transfer has completed, click the Disconnect button, unmount the disk in Nautilus, remove it from the reader and insert it into your phone.
5. Start your phone's music player. There should be a one-time initialization where it reads through the track info and loads up your songs. Once you see that, you know the phone has successfully recognized the music on your memory card.
6. Enjoy your music!
That's really all there is to it. Once you have done the initial setup, just repeat Part C to sync/resync additional music as you please. If you find alternative methods or find any issues with this tutorial, please post a reply. I will update this post as necessary.
If your phone does not see your music, check that your
If you have issues, please post as much info as you can, including:
-The symptom you ran into (such as "my phone doesn't see my music")
-Whether you received any errors from Amarok (and if so, what the errors are)
-Wireless carrier and phone brand/model
-Phone software version: where this can be found depends on the phone. For example on my LG Dare, I find this under Main Menu->Settings&Tools->Phone Info->SW/HW Version. My firmware version is VX970V05.
I can't guarantee I'll be able to help, but having worked for the big "V" for 3 years (not anymore, thank goodness) I have a fair amount of phone-savvy and I'll help if I am able.
1. The tracks I transferred were all mp3 files with data stored in ID3 tags. I have not experimented with other formats.
2. Album Art embedded in the ID3 tag will be read by the phone's music player automatically! This seems to be the only way to get artwork onto the phone in a format that the phone will recognize.
3. The phone didn't recognize any of my genre tags, although it did pick up on Artist/Album/Song Title.
4. Make sure not to use nesting of files under my_music - they must ALL be in my_music and NO other subfolders.
5. As I mentioned, I used this method to sync a playlist I created from my library on my desktop to my phone, but the playlist itself did not end up being visible in the phone's music player. This wasn't a big deal to me, so I left it at that.
Further Reading: Howardforums.com is an excellent source of information for cell phone enthusiasts. You will be able to find a lot of related info such as how your music player works, other known tricks, etc. Couldn't hurt to read up on your phone!